First Alert FA2100C User Manual page 4

Burglary Protection
Alarms
Memory Of Alarm
SYSTEM OVERVIEW
The burglary protection portion of your system must be turned on or "armed"
before it can sense burglary alarm conditions and sound an alarm. Your system
can be armed in one of four modes: STAY, AWAY, INSTANT and MAXIMUM.
Refer to the ARMlNG THE SYSTEM sections of this manual for instructions on
using these modes.
Your system also provides a CHIME mode for alerting you to the opening and
closing of doors and windows while your burglary protection is disarmed.
When an alarm occurs, both the keypad and external sounders will sound, and a
message at the keypad will identify the zone(s) causing the alarm. In addition, if
your system is connected to a central monitoring station, an alarm message will be
sent. You may stop the sound by entering the OFF sequence (user code + OFF
key) at your keypad .
When an alarm, supervisory or trouble condition occurs, the keypad displays the
number(s) of the zone(s) that caused the problem, and displays the type of
condition present (ex. FIRE, ALARM, SUPV, CHECK). The display remains until it
is cleared by entering the OFF sequence (user code +.OFF key) a second time.
-4-