First Alert FA2100C User Manual page 24

= --
7.
-DISARMING BURGLARY PROTECTI-ON
AND SILENCING BURGLARY ALARMS
Using the
0 1 OFF Key
IMPORTANT:
If you . return and the
main burglary sounder is
on, DO NOT ENTER, but
CONTACT THE POLICE from a
nearby safe location.
If you return after an
alarm has occurred and
the main sounder has
shut itself off, the keypad
will beep rapidly upon your
entering, indicating that an
alarm has occurred during
your absence.
LEAVE IMMEDIATELY, and
CONTACT THE POLICE from a
nearby safe location.
The OFF key is used to disarm the burglary protection and to silence burglary
alarm sounds.
To Disarm Burglary Protection
Enter your user code and press the OFF kev. The, "Ready" message will be
displayed (providing no burglary zone is faulted), and the keypad will beep once
to confirm that burglary protection is disarmed.
To Silence and Reset a Burglary Alarm
SEE IMPORTANT NOTE AT LEFT!
Enter your user code and press the OFF key to silence the alarm (or warning
tones of a Memory of Alarm). Note the zone in alarm on the keypad display, and
make that zone intact (close door, window, etc.). Now re-enter your user code
plus the OFF key again to clear the keypad's Memory of Alarm display. If the
display will not clear and does not provide a "Ready" message, notify the alarm
agency.
To Silence and Reset a Fire Alarm see page 15.
See the SUMMARY OF AUDIBLE/VISUAL NOTIFICATION section for
information which will. help you to distinguish between FIRE and
BURGLARY alarm sounds.
-24-