Emergency And 24 Hour Non-Fire Alarms; General - First Alert FA2100C User Manual

EMERGENCY AND 24 HOUR NON-FIRE ALARMS
General
Your system may have sensors which detect non-fire related alarm conditions, such as the
triggering of an HVAC (Heating, Ventilating, or Air Conditioning) temperature sensor, the
pressing of a holdup alarm button, etc. Your system may provide some or all of the
indications listed 'below, depending on what your installer selected to occur when one of
those conditions is detected.
if your system's keypad has any active emergency alarm key(s) (see REMOTE KEYPAD
EMERGENCY KEYS on page 11) these indications may be manually triggered by
pressing the appropriate emergency key (or corresponding emergency key pair).
l
The keypad buzzer produces a steady sound (no sound for silent alarms).
l
The external alarm sounders produce a steady sound (no sound for silent alarms).
l
The keypad LCD (Fixed-Word) displays the word "ALARM" and the zone number in
alarm. Alpha keypads also display a description of the zone in alarm (no keypad displays
for silent alarms).
-1 1
ALPHA FIXED-WORD
l
An emergency alarm message is sent to the central station. .
Silencing
and Resetting
an Emergency Alarm
To silence the keypad buzzer
and external alarm sounders:
Enter your User Code,
followed by the OFF key.
The kevoad's LCD will disolav the
To reset the keypad alarm display:
First correct the cause of the alarm
condition, and then:
Re-enter your User Code,
followed by the OFF key.
number--of the zone in atarm as
a Memory of Alarm indication.
-26-