First Alert FA2100C User Manual page 16

BURGLARY PROTECTION ENTRY/EXIT DELAYS
General
Exit Delay
Alerking Sound
this is active for your
system, and if so,
The burglary protection portion of your system has preset time delays, known as
exit delay and entry delay. When you arm your burglary protection, exit delay
gives you time to leave through the entry/exit door without setting off an alarm.
Entry delay gives you time to disarm the burglary protection when you reenter
through the entry/exit door. The burglary protection must be disarmed, however,
before the entry delay period ends, or an alarm will occur. The keypad will beep
slowly during the entry delay period, reminding you to .disarm the burglary
protection.
You can also arm the protection with no entry delay at all by using either INSTANT
or MAXtMUM arming modes. These modes can provide greater security while you
are sleeping or while you are away for extended periods of time.
If active for your system, and if so-programmed by your installer, when arming
your burglary protection AWAY (see page 22) or MAXIMUM (see page 23), slow
beeps will sound from the keypad during exit delay, turning to fast beeps during
the final five seconds of the delay time.
See your installer for your delay times and record them here:
Exit Delay: [71 seconds
. Entry Delay:
q
seconds
-16-