First Alert FA2100C User Manual page 18

BYPASSING BURGLARY PMECTION ZONES
Using the
cl
This key is used when you want to arm the burglary protection portion of your
6 BYPASS Key
system with one or more zones intentionally unprotected. The burglary protection
must be disarmed first.
1. Enter your user code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 02; 03, etc.).
when an OFF sequence
&g/e d/g/t zone "urnbets must be preceded by a zero.
(user code plus OFF) is 3. When finished, the keypad will momentarily display a "Bypass" message for
each bypassed zone number. Wait for these zones to be displayed, to confirm
their bypass.
4. Arm the system's burglary protection as usual.
TO BYPASS ZONES:
l
ENTER USER CODE.
l
PRESS
BYPASS
KEY.
l
ENTER ZONE Nos.
l
WAIT FOR BYPASSED ZONES
TO BE DISPLAYED.
l
ARM BURGLARY PROTECTION
AS USUAL.
TYPICAL MOMENTARY DISPLAYS
OF BYPASSED ZONE
Bypassed zones are unprotected and will not cause an alarm if violated
while your burglary protection is armed.
ALPHA
pi7
FIXED-WORD
-18-