Timer Recording; Vcr Plus+ Timer Programming - JVC DR-M100S Instructions Manual

VCR Plus+ Timer Programming

You can program this unit to timer record as many as 8 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Make sure that the unit's built-in clock is set properly.
CANCEL
VCR Plus+
1
Load a recordable disc.
●
For details, refer to "Placing A Disc" (A pg. 10).
2
Press VCR Plus+ to
display the AVCR Plus+
PRGMB screen.
3
Press the number keys
to enter the
APLUSCODE NO.B of a
program you wish to
record, then press
ENTER.
●
If you have made a
mistake, press CANCEL and input the correct number before
you press ENTER.
●
To clear all entered numbers at a time, press CLEAR(o).
●
If the number you entered is invalid, APLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV
screen. Input a valid APLUSCODE NO.B.
●
If AGUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU
WANT TO RECORDB appears on the TV screen, set Guide
Channel numbers manually.
●
When APROGRAM FULL DELETE UNWANTED TIMER
PROGRAMB appears on the TV screen, you need to cancel
some of the reserved programs.
4
The APLUSCODE NO.B you entered and the matching timer
recording information are displayed on the TV screen. Check
the program data.
●
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see "Changing VCR Plus+ Setting" (A pg. 62)
and set the Guide Channel number correctly.
0-9
TIMERj
FGD E
Selection Keys (
ENTER
RETURN
CLEAR o
( )
VCR Plus+ PRGM
PLUSCODE NO. 1 2 3 4
DATE START STOP
DAILY/WEEKLY REC MODE
SP
OK
1 2 3
ENTER VCR PLUS+ CODE WITH [0 - 9] KEYS
4 5 6
THEN PRESS [ENTER]
7 8 9
0
5
Press selection keys to
select desired recording
option as required.
6
Press selection keys to
select the desired
setting, then press
ENTER.
●
"Daily/Weekly Recording
Function" (A pg. 37)
●
"Recording Mode"
(A pg. 34)
●
"Modify Title Name" (A pg. 46)
7
Press ENTER to access the Program Confirmation screen.
8
Press ENTER to complete the timer programming.
●
To program another timer, repeat steps 2 - 8.
●
If APROGRAM OVERLAPPEDB appears on the TV screen, see
"When Programs Overlap Each Other" (A pg. 41).
9
Press TIMERj to engage the unit's timer mode.
● The unit turns off automatically and j appears on the front
display panel.
●
To disengage the timer mode, press TIMERj again.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the VCR Plus+ program screen in
)
step 4. When this happens, set the correct Guide Channel
number for that station.
●
There may be cases that the "VCR Plus+ Timer Programming"
function prolongs the stop time of the programming.
●
When two successive programs are recorded with the "VCR
Plus+ Timer Programming" function, the ending of the first
program or the beginning of the second program may not be
recorded.
●
If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
Daily/Weekly Recording Function
You can record programs with one of the following weekly/daily
timer settings.
WEEKLY
MON-FRI
CH
MON-SAT
NAME
SUN-SAT

TIMER RECORDING

VCR Plus+ PRGM
PLUSCODE NO.
DATE START
DAILY/WEEKLY REC MODE
XP
EXIT
OK
SELECT
PROG
Select to record a weekly program.
Select to record a daily program from Monday
through Friday.
Select to record a daily program from Monday
through Saturday.
Select to record a daily program from Sunday
through Saturday.
37
EN
1 2 3 4 5 6 7 8
STOP CH
NAME
SET TIMER PROGRAMING WITH [CURSORS]
THEN PRESS [ENTER]