Digital Audio Dubbing - JVC DR-M100S Instructions Manual

EDITING
56
EN

Digital Audio Dubbing

You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
●
Turn on the TV and select an input mode such as EXT1.
Example: Dubbing to an MD
Digital audio device (MD
Player
Recorder
deck, etc.)
Coaxial cable
(not supplied)
To [DIGITAL OUT
(COAXIAL)]
Rear of unit
1
Connect the unit and a digital audio device using an optional
coaxial cable.
2
Place a disc on the unit and load an MD on the connected
digital audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press W to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press I to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press o to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.