JVC DR-M100S Instructions Manual page 67

On-screen Message
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
●
A disc that is not registered in the library has been inserted.
Register the disc as necessary. (A pg. 51)
INSERT DISC #XXXX
●
Appears when a title that has been selected in the library is not
contained in the loaded disc.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
●
Recording and/or editing cannot be performed.
●
The number of titles exceeds 99.
●
The number of play lists exceeds 99.
SET CLOCK BEFORE TIMER PROGRAMMING
●
To set the timer program, the clock must be set in advance.
(A pg. 19)
PROGRAM FULL
DELETE UNWANTED TIMER PROGRAMS
●
You can program this unit to timer record as many as
8 programs. To program more, you need to cancel a timer
program already set. (A pg. 41)
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
When a playback-only disc or a finalized disc is loaded, R has
●
been pressed. (A pg. 8)
REGION CODE ERROR CHECK DISC
●
A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (A pg. 8)
UNREADABLE DISC
CHECK DISC
When an incompatible disc is loaded, I has been pressed.
●
(A pg. 8)
COULD NOT FORMAT THE DISC
CHECK THE DISC
●
Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 11, 63)
PRESS [STOP] AGAIN TO STOP RECORDING
During Live Memory playback, o has been pressed. (A pg. 27)
●
TIMER RECORDING COMPLETED
●
Timer recording has finished during Live Memory playback.
PLAYBACK WILL STOP THEN TIMER RECORDING WILL
START
●
Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
COPY PROHIBITED
CAN NOT RECORD
●
An attempt has been made to record copy-protected contents.
●
An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible.
COPY PROHIBITED
CAN NOT PLAY
●
The unit has detected invalid contents at the start or in the middle
of playback.
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY
AND POWERED ON
●
An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
●
Check the connection. (A pg. 53)
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,YOU
CAN THEN REGISTER ADDITIONAL INFORMATION
●
The memory for registration for the Navigation system is full. The
recording cannot be started even though the capacity for the
recording is enough.
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE TO REGISTER
INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,YOU
CAN THEN REGISTER ADDITIONAL INFORMATION
●
The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
CAN NOT SET DISC TIMER PROGRAMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
DVD-RAM
DVD-RW (VR MODE)
●
On-Disc Timer Programming has been attempted when a disc
that is not compatible with the function is loaded.
NO DISC INSERTED
●
On-Disc Timer Programming has been attempted when a disc is
not loaded, or loaded upside down.
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
●
An invalid PlusCode number has been input.
GUIDE PROGRAM IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
●
To set the timer program using the VCR Plus+ system, the Guide
Channel Number must be set in advance.
CAN NOT SET VCR PLUS+ TIMER PROGRAMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER
RECORDING, THEN ENTER THE PLUSCODE AGAIN
●
Appears when you tried to input a PlusCode number during timer
recording or instant timer recording.
COULD NOT FINALIZE THE DISC
CHECK THE DISC
●
Finalizing is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry.
COULD NOT CANCEL DISC FINALIZATION
CHECK THE DISC
●
Canceling disc finalization is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry.
TROUBLESHOOTING
67
EN