Maintenance And Lubrication Schedule - BraunAbility Foldout Ramp Maintenance And Service Manual

MAINTENANCE and SERVICE

Maintenance and Lubrication Schedule

Perform all procedures listed in previous section also
Power Fold Ramps:
Remove ramp housing cover/rear vertical panel
and inspect:
(loose or missing)
or missing)
mounting screws)
ment or damage
Inspect power source: Vehicle battery, 50
6 Months
ampere fuse, vehicle engine compartment fuse
block and driver side under dash-mounted fuse
block.
Inspect kneel actuator assembly for:
switch activation block)
damage
wear, damage or misalignment
connections, proper routing, wear or other
damage
other damage
Kneel electrical override
Kneel assembly chain
Repeat all previously listed inspection, lubrica-
Consecutive
3 Month
tion and maintenance procedures at 3 month
Intervals intervals.
Page 6
Lubricate with Anti-Seize (14 oz. caulk tube
available per Braun part no. 24710)
Resecure, adjust microswitches, replace dam-
aged parts or otherwise correct as needed.
Note: See 2008 Foldout Ramp Exploded views
on pages 19B-20B, 23A-24A and 23B-24B.
-
Resecure, repair or replace
- Realign, resecure, replace damaged parts or
otherwise correct as needed. Note: See Kneel
Actuator Assembly exploded view on page 27.
Check operation
Lubricate with Anti-Seize (14 oz. caulk tube
available per Braun part no. 24710)