Troubleshooting - BraunAbility Foldout Ramp Maintenance And Service Manual

TROUBLESHOOTING

FUNCTION SYMPTOM
2.10
No
Lower
Operation
2.00
KNEEL
SYSTEM
(LOWER)
2.20
Faulty
Kneel
(Lower)
Operation
3.10
No Open
Operation
(Motor Does
Not Run)
3.20
Motor Runs
3.00
But Door
POWER
Does Not
DOOR Move
(OPEN)
3.30
Faulty
Open
Operation
3.40
Door Does
Not Open
Fully
Page 8
POSSIBLE CAUSE
2.11 See 1.00
2.12 Kneel On/Off switch is in OFF
position.
2.13 Actuator harness disconnected or
otherwise damaged
2.14 Actuator damaged. Note: Actua-
tor can be checked with kneel
override switch (under driver side
third row seat).
2.15 Chain disconnected or otherwise
damaged
2.16 Kneel Lowered microswitch har-
ness disconnected/damaged or
microswitch damaged
2.17 Kneel electrical override switch
damaged or disconnected
2.21 Mechanical binding
2.22 Misalignment or damage to kneel
system components. Inspect
kneel actuator assembly for:
ment (loose or missing)
ment, or other damage
ment, wear, misalignment or
damage
3.11 See 1.00
3.12 Doors locked
3.13 Door master lock-out switch ON
3.14 Power door motor harness dis-
connected or damaged
3.15 Power door motor damaged
3.21 Misaligned or otherwise damaged
drive cable or door track
3.22 Power door motor clutch failure
3.31 Obstruction in door path
3.32 Mechanical binding
3.41 Door doesn't catch full open posi-
tion hold latch
3.42 Power sliding door module
(PSDM) needs recalibrated for
extended travel
3.43 See 3.30
REMEDY
Press switch to ON position
Connect, repair or replace
Press the kneel electrical override
switch to test actuator (driver side third
row seat). Replace if damaged.
Connect, repair or replace
Connect/repair harness or replace
microswitch
Check connection or replace
Check and correct
Connect, replace or otherwise correct
as needed
-
-
-
Unlock doors or use the keyless
transmitter or overhead console pas-
senger power sliding door switch
Switch master lock-out switch to OFF
Correct or contact Braun Product
Support
Contact Chrysler Service Center
Correct or contact Braun Product
Support
Contact Chrysler Service Center
Remove obstruction
Check and correct
Correct or contact Braun Product
Support
Correct or contact Braun Product
Support