Advertisement
•
NOTE: When in the 12h mode, there is only a 'PM' display, which appears under the word TIME. During the 'AM' hours, this area will be blank. Press and
release the SET button once to confirm and move to the year.
•
YEAR: The Year will flash. Use the PLUS or MIN/MAX buttons to set the year. Press and release the SET button once to confirm and move to the month.
•
MONTH: The Month will flash. Use the PLUS or MIN/MAX buttons to set the month. Press and release the SET button once to confirm and move to the
date.
•
DATE: The numeric day will flash. Use the PLUS or MIN/MAX buttons to set the date (The weather station will determine the day of the week
automatically). Press and release the SET Button once to confirm and move to Fahrenheit/Celsius.
•
FAHRENHEIT OR CELSIUS: A degree symbol will flash, followed by F or C. Use the PLUS button to change to your preference. Press and release the
SET button once to confirm and move to Mph.
•
WIND SPEED UNIT OF MEASUREMENT: Mph will flash. Press and release the PLUS or MIN/MAX button to select MPH, KM/h or M/S. Press and release
the SET button to confirm and move to rainfall measurement.
•
RAINFALL MEASUREMENT: Inch will flash. Use the PLUS or MIN/MAX button to change to MM, if desired. Press and release the SET button once to
confirm and move to relative air pressure unit.
•
RELATIVE AIR PRESSURE UNIT: InHg (inches of mercury) will flash. This can be set in inHg or hPa (hectopascal). Use the PLUS or MIN/MAX button to
select your choice. Press and release the SET button once to confirm and move to relative pressure number.
•
RELATIVE PRESSURE NUMBER: The barometric air pressure (lower part of screen) will flash. Press and release the PLUS button to increase or
MIN/MAX button to decrease to the desired relative air pressure value. Press and release the SET button once to confirm and move to forecast sensitivity.
•
FORECAST SENSITIVITY: Two air pressure tendency arrows will appear (lower right portion of screen) and a flashing number will appear in the
'pressure' area. Press and release the PLUS or MIN/MAX buttons to select the desired forecast sensitivity setting of 0.06, 0.09 or 0.12 inHg.
•
The lowest (most sensitive) number is used near the coastline, the highest (least sensitive) number is for the desert, and middle number is for everywhere
else. Press and release the SET button once to confirm and move to storm warning threshold value.
•
STORM WARNING THRESHOLD VALUE: The down arrow and a number will flash. Use the PLUS or MIN/MAX buttons to select a value from the range
of 0.09 to 0.27. This value is used to trigger a Storm Warning Alarm. Press and release the SET button once to confirm and move to storm warning ON or
OFF.
•
STORM WARNING ALARM: Use the PLUS or MIN/MAX buttons to select AOF (Alarm Off) or AON (Alarm On). When the pressure falls by the Storm
Warning Threshold Value you have selected, an alarm (if on) will be triggered. Press and release the SET button once to return to normal display.
Note: When the storm warning threshold is reached you will see the cloud with rain icon and the down arrow will flash. There is not an audible alarm.
WEATHER STATION DISPLAY
*When the signal from the transmitter or rain gauge (optional) is successfully received by the weather station, the
the
icon will not be shown on the LCD. The short blinking of the
WEATHER STATION MODES
Press and release SET/MODE button to toggle between the weather station of Mode 1 or Mode 2: After 30 Seconds, the LCD will revert back to
Pressure and Wind Speed.
MODE 1:
Wind Speed
Outdoor Temperature
Pressure
RAIN DISPLAY
In MODE 2, press and release the PLUS button and the 24-hour or Total Rain, should appear in the Pressure area. Press and release the PLUS button to
toggle from Pressure, 24-hour Rain and Total Rain. After 30 Seconds the LCD will revert back to Pressure and Wind Speed.
•
24-HOUR RAIN: The 24-hour rain reflects the rain that has fallen from current time and back 24-hours. This is not a midnight to midnight
measurement. The day is not a fixed clock time measurement. It is literally an ongoing "last 24 hours" timer.
•
TOTAL RAIN: Total rain will remain until you manually reset this value. Total rain reflects the rain from time of weather station set-up until you
manually reset the total rain.
MIN/MAX DATA
The Weather Station will record the Maximum and Minimum value of the various Weather Data with Time and Date of recording automatically. This weather
station will show the minimum and maximum values from setup, until you reset the MIN/MAX temperatures or remove the batteries from the weather station.
If you wish to view a 24-hour MIN/MAX reading, reset the MIN/MAX temperatures at the same time each day.
Time display
Wind Chill in
°C or °F
Weather tendency
Indicator
Outdoor temperature/
dew point*
in °C or °F
Transmitter signal
reception icon*
Air pressure
History histogram
MI/MAX icons
icon shows that a reception is occurring at that time.
HISTORY
Low battery indicator
icon
(rain sensor - optional)
MODE 2:
Wind Gust
Dew Point Temperature
24-Hour Rain or Total Rain
Calendar/indoor and
temperature/seconds display:
Press and release the + button
Wind speed/gust* in
mph, km/h, m/s
Weather forecast
Icon
Low battery indicator
*(transmitter)
Outdoor relative
humidity in %RH
Low battery indicator
*(weather station)
Relative air pressure / 24 hr.
rainfall / Total rainfall display*
(only if there is a rain sensor
being used)
icon will be switched on. If not successful,
2
Advertisement
