Bayer HealthCare Ascensia Breeze User Manual page 49

What You See
E11 or higher
The display goes
blank when the
meter is turned
on.
Meter will not
turn on.
Meter fails to
start countdown
after blood is
applied.
What It Means
Meter Malfunction
1. You may have
accidentally pressed
the button.
2. Meter will turn off after
3 minutes without use or
15 minutes of no use
while waiting for you to
apply blood or control
solution. This is a normal
expected action that
saves battery life.
1. Battery life has ended.
2. Battery holder is loose or
battery is installed + side
down.
1. Not enough blood.
2. The inside of your meter
may be dirty, or foil
from the 10-test disc
may be lodged in the
front of the meter.
What You Do
Turn meter off, then on
using . Then retest. If
error remains, contact your
Bayer Customer Service
Department (see pg. 45).
1. Press the
2. Press the
1. Replace Battery
(see pg. 28).
2. Check the battery and
the battery holder to be
sure they are tightly in
place and correctly
installed (see pg. 28). If
display is still blank,
replace battery (CR2025).
1. Discard used test strip.
Retest using a round
drop of blood.
2. Clean inside of meter
(see pg. 27). Retest.
button.
button.
43