Removin The Display Assembly - Alienware M17x Service Manual

Display
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a
wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: Only a certiied service technician should perform repairs on
your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the
main battery (see "Removing the Battery Pack" on page 11) before
working inside the computer.
CAUTION: To avoid damage to the display, you must not disassemble
your Ed e-to-Ed e display assembly in the ield.
Display Assembly
Removing the Display Assembly
1. Follow the instructions in "Before You Be in" on pa e
2. Remove the battery pack (see "Removin the Battery Pack" on pa e
3. Remove the center control cover (see "Removin the Center Control Cover"
on pa e 33).
4. Remove the keyboard (see "Removin the Keyboard" on pa e
5. Remove the palm rest (see "Removin the Palm Rest" on pa e
6. Remove the left and ri ht brackets (see "Removin the Brackets" on
pa e 47).
7. Remove the ma nesium cover (see "Removin the Ma nesium Cover"
on pa e 50).
CHAPTER 13: DISPLAY
6.
11).
38).
42).
053
/
053