The Audit Certificate List - Cisco TelePresence System Quick Set C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction

The audit certificate list

If you want to use the ExternalSecure audit logging mode,
you must upload a list of trusted audit certificates to the video
conference system. This list must cover all audit servers that
your system shall trust.
In the ExternalSecure audit logging mode audit logging
information will only be sent to entities holding a valid audit
certificate.
NOTE: You must always upload the audit certificate list before
enabling secure audit logging.
About audit logging
Audit logging records all sign in activity and configuration
changes on the system.
Audit logging is disabled by default. You can enable audit
logging using the on-screen menu or the web interface.
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings
1. Upload the audit certificate list
To install the audit certificate, you will
need:
• Audit list file ( .PEM format)
Contact your system administrator to
obtain the required file.
i. Press Browse... and locate the file with
the audit list file (.PEM format).
ii. Press Upload to store the certificate on
your system.
2. Enable secure audit logging
When you have uploaded the audit
certificate list you must enable secure
audit logging:
i. Select Advanced Configuration
the Configuration tab. Then select
Security in the list of settings groups
on the left hand side.
ii. Enter the Address and Port
the audit server.
iii. Select ExternalSecure from the
Logging Mode drop down list.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
25
Password protection
under
iii
number of
ii
i
Administrator guide
Appendices Contact us
www.cisco.com