Table of Contents
Advertisement
32
Aromatherapy Tray Installation (98500380)
WARNING:
Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
1
Prepare the aromatherapy housing following the directions below.
2
Install the roller plate following the directions below.
Reach in and poke out this
a
cover plate (it is held in place
with magnets).
3
Slide the housing into the roller plate following the directions below.
Slide the roller plate
a
all the way out.
Travis Industries
Optional Equipment
7/16" Socket Wrench
Attach the mounting plate (included
a
with the stove) to the housing with two
8-32 1/4" screws (included with the
aromatherapy kit).
NOTE: Be careful with the
nuts - the magnets located
near the side of the opening
may divert the socket wrench.
Tilt the housing upwards and
b
insert this notch under the
rollers. Tilt the housing level
to complete the installation.
Housing
Attach the cover plate
b
(included with the stove) to the
mounting plate with two 1/4-20
nuts (included with the stove).
Secure the roller plate with four 8-32 nuts
c
(included with the aromatherapy kit).
Roller Plate
4041220
Phillips
Screwdriver
Bend these tabs
b
upwards on the roller
plate.
11/32" Socket Wrench
with Extension
1 0 0 - 0 1 1 5 3
Hide quick links:
Advertisement
Table of Contents
