Leica 3D Disto User Manual page 115

3D Disto, Software Applications
Metre mark
step-by-step
1. Start application in Menu » Applications » Tool Kit.
2. The running application stays open in the background.
3. Press on the Toolbar.
4. Pop-up prompts to enter the height and measure that reference height.
5. Viewfinder opens. Target reference point on the wall. Press
6. Pop-up prompts to enter an absolute height to be laid out.
7. Viewfinder opens. Roughly target close to expected absolute height on the wall.
Press .
8. Laser point flashes to indicate the exact position of the absolute height.

Refer to "8 Error Messages" for information about possible error
messages.
9. Press to close Tool Kit.
115
.