Advertisement
MP 4+ Filter kit 44-88
The kit (14) includes a filter holder with
two filter trays, gelatin filters and a filter
frame. The filters are intended to bal-
ance the MP 4+ tungsten and halogen
lighting for use with Polacolor films.
Filters for other purposes may be used
also, as required. Complete instruc-
tions are provided with the kit.
See Appendix for information about
other methods of attaching filters to the
MP4+ lenses.
Macro extension 44-45
The macro extension (15) is attached
to the camera between the bellows
and the camera head. It enables you
to make photographs at magnifications
up to about 27X, using the 17mm lens.
You can use two extensions to
increase the magnification range
accordingly.
See Appendix for more information.
Universal camera mount 44-85
This accessory (16) enables you to
convert the MP4+ into a 35mm copy-
ing or slide-making system. The MP4+
camera head is removed, and the
mount is attached to the column in its
place. Virtually any 35mm camera, and
many conventional cameras of other
formats, can be used on the mount.
Introduction 6
Lighting options
Several lighting options are available
for the MP4+ System. These are or-
dered separately, allowing the system
to be customized for a wide variety of
applications.
Tungsten lighting
This lighting (17) is suitable for most
general purpose copystand photogra-
phy. Includes four 150 watt lamps and
lamp holders. The lamps are attached
to the MP4+ lamp arms.
11O-l 20VAC system: 44-26
220-240VAC system: 44-36
Halogen lighting
This lighting (18, 19) is suitable for
most general-purpose copy-stand
photography. Includes two 300 watt
lamps and lamp holders. The lamps
are attached to the MP4+ lamp arms.
Halogen lamps produce light of the
same color temperature throughout the
life of the bulb. As a result, the film ex-
posure and filtration requirements are
more consistent. (As tungsten lamps
age, they produce light of a lower
color temperature.)
120VAC system: 44-28
220VAC system: 44-38
240VAC system: 44-34
Advertisement
