Advertisement
TTI AVl810 8x10 camera
This camera (6) may be attached to
the column in place of the standard
MP 4+ camera, to allow the use of
Polaroid instant 8x10 films.
Polaroid 8x10 film system
This includes the 8x10 film holder
and film processor (7). The film
holder also can be used with other
8x10 camera systems.
The reflex viewer 44-55
This accessory (8) attaches to the
ground glass. The viewer contains a
mirror, which directs the ground glass
image forward, rather than upward, to
make viewing and focusing much more
convenient. The viewing hood on the
front ex-cludes ambient light, so that
the image on the ground glass may be
seen most clearly.
The image you see with the reflex
viewer will appear the right way up, but
reversed from left to right. (This rever-
sal will not, of course, appear in your
picture.)
Introduction 4
The focusing screens
The three focusing screens (9) are for
use with the Polaroid film holders de-
scribed below. They also can be used
with most wet-process 4x5 sheet film
holders, and some wet-process roll film
holders. They are scribed for Polaroid
4x5 sheet film and 31/4 x 41/4 pack
film formats. The image area of 4x5
pack films extends from the right-hand
marking to about l/8 in. (3mm) beyond
the left-hand marking.
Ground glass 44-50
This is a standard ground glass
screen, for general-purpose
photography.
Aerial image ground glass 44-5 7
This ground glass has a clear-glass
circle in the center. The image can be
focused on the ground glass in the
normal way, or in the clear spot as an
"aerial image". Instructions for use are
supplied with this ground glass.
Calibrated ground glass 44-54
It is calibrated in inches and centi-
meters, to measure reproduction
size.
Advertisement
