MP 4+ care and maintenance
Polaroid film holders: The two steel
rollers in each film holder must be kept
absolutely clean, to prevent spots on
pictures and jammed film. Always check
the rollers before loading film; clean
them with a damp cloth as explained
in the instructions packaged with the
holder.
Lenses and shutter: Never touch the
surface of a lens. You can remove fin-
gerprints and smudges by wiping gently
with lens tissue or a soft, lint-free cloth.
The elements in each lens are precisely
mounted and aligned by the manu-
facturer, and should be removed only by
a qualified camera repair technician.
The shutter is lifetime lubricated; do not
attempt to either oil or adjust it.
Reflex viewer: The reflex viewer con-
tains a front-surfaced mirror, which is
easily scratched or damaged. Do not
touch it. Remove fingerprints with a soft,
lint-free cloth; use an antistatic brush to
remove dust.
Troubleshooting 3
Moving parts: Never attempt to lu-
bricate any part of the assembly. All
moving parts are lubricated at the fac-
tory, for smooth performance over a long
period of time. Keep all parts of the
camera clean, and cover the entire sys-
tem when it is not in use.
Spare parts: For information on parts
that may be replaced by the camera
owner, and for a supply of such parts,
please contact the Polaroid Resource
Center or the nearest Polaroid Office.
CAUTION: TO AVOID ELECTRICAL
SHOCK HAZARDS, DO NOT ATTEMPT
TO OPEN SWITCH UNIT OR OUTLET
UNITS. IF SERVICE OR REPAIR
WORK IS REQUIRED, CONTACT
AUTHORIZED SERVICE CENTER.