Advertisement
Location
The MP 4+ System should be as-
sembled in the area where it will be
used. The system should beplaced on a
sturdy table or counter, large enough to
provide a work surface next to the base-
board. (A desk with locked storage
space is ideal, to prevent unauthorized
use.) The system must be located near
an appropriate electrical outlet. Avoid
placing the system near windows or
other sources of bright light. Be sure the
lamp arms do not extend into corridors.
DO NOT LET POWER CORD HANG
OVER FRONT EDGE OF TABLE OR
COUNTER, OR TOUCH HOT SUR-
FACES.
UNIT MUST BE GROUNDED. POWER
CORD HAS THREE-PRONGED
GROUNDING PLUG, WHICH MUST BE
PLUGGED INTO APPROPRIATE
OUTLET. IF SUCH AN OUTLET IS NOT
ALREADY AVAILABLE, EXISTING
OUTLET MUST BE CHANGED.
DO NOT, UNDER ANY
CIRCUMSTANCES, REMOVE
GROUND PRONG FROM PLUG.*
IF EXTENSION CORD IS NEEDED,
USE CORD WITH GROUNDING PLUG*
AND SUITABLE CURRENT RATING.
CORDS RATED FOR LOWER
AMPERAGE THAN UNIT MAY
OVERHEAT. ARRANGE CORD SO
THAT IT WILL NOT BE TRIPPED OVER
OR PULLED.
* THIS APPLIES ONLY IN COUNTRIES
WITH GROUNDED ELECTRICAL
SUPPLIES.
Assembly 2
Advertisement
