Advertisement
The two MP 4+ models
The MP4+ System is available in two
basic models (Illustration 1). The
Standard Model (left) is shown with the
optional halogen lighting; the XLR Model
(right) includes the optional tungsten
lighting and base board light box.
MP 4+ Standard Model
Total camera height: 46 in. (116cm)
Column height: 35 in. (90cm)
Baseboard area overall: 18x23 in.
(46x59cm)
Standard column/camera: 44-04
Standard baseboard 11 O-l 20VAC: 44-14
Standard baseboard 220.240VAC: 44-16
MP 4+ Model XLR
Total camera height: 66 in. (168cm)
Column height: 55 in. (140cm)
Baseboard area overall: 23x29 in.
(59x74cm)
XLR column/camera: 44-05
XLR baseboard IIO-120VAC: 44-15
XLR baseboard 220-240VAC: 44-17
The Standard Model (2-left) has a non-
rotating column; the XLR Model (2- right)
has a rotating column.
Both models include a drawer below the
baseboard (3), which contains the ring as-
sembly for the instructions and also pro-
vides a convenient storage area for the
lenses.
Introduction 3
Main camera parts (4)
a
Reflex viewer and hood
b
Sliding camera head
c
Camera body
d
Shutter
e
Lens
f
"Exposure" cable release
g
Column scale
h
Camera height adjustment crank
i
"Pre-view" cable release
j
Film holder
The sliding camera head 44-41
The sliding head (5) fits on top of the
camera bellows. The ground glass and
reflex viewer are mounted on the left
side; the film holders are inserted into
the right side. This feature allows you
to view and focus the camera without
removing the film holder. You simply
slide the head into position for each
operation. The "pre-view" cable re-
lease opens the shutter as you slide
the head into the viewing position, and
closes it when you slide the head into
the picture-taking position.
Advertisement
