Connection, Display And Operating Elements; Function Keys - Devolo MicroLink dLAN Audio User Manual

2.4

Connection, display and operating elements

2.4.1

Function keys

The MicroLink dLAN Audio adapter has two function keys:
Selecting the channel with the function keys
Using the left function key ³, set channels 1 to 4 for sending or receiving
audio data over the power supply network. The LEDs underneath each chan-
nel indicate which channel you have selected (see "LEDs" on page 16).
Press function key ³ to switch to the next channel. After the fourth channel,
the selection returns to the first.
Selecting the operating mode with the function keys
With the right function key ·, set the operating mode of the MicroLink dLAN
Audio adapter. The setting you have selected is indicated by the red LED
directly under the function key (see "LEDs" on page 16).
Press the function key · to switch to the next operating mode, from 'Play-
back' to 'Record from line input', to 'Record from digital input', and finally to
'Record from microphone input'. After the last operating mode, the selection
returns to 'Playback'.
As an alternative to operating the MicroLink dLAN Audio adapter using the
function keys, you can also set the channel and the operating mode using the
HTML configuration interface (page 30).
³
|
Introduction
·
|
devolo MicroLink dLAN Audio
15
|