The Devolo Magic Adapter Features; Line Connections; Network Connection - Devolo Magic2 LAN DINrail Manual

2.3 The devolo Magic adapter fea-
tures
b
Four line connections
b
One Gigabit network connection
b
Three indicator lights
a
Power
a
PLC
a
Ethernet
The LED status display can be disabled. You can
find more information about this in Chapter 5
Configuration or in the product manual for the
devolo Cockpit software available online at
www.devolo.com/cockpit.
b
One PLC button
b
One reset button

2.3.1Line connections

This is where you connect the conductors to the
corresponding line connections.
Single-phase connection: Neutral conductors and
external conductors are connected to terminals N
and L1.
Three-phase connection: Neutral conductors and
three external conductors are connected to termi-
nals N, L1, L2 and L3. The device is supplied with
power via terminals N and L1.
PE connection: Connecting the earth wire to the
PE terminal
The permitted conductor
connection to the terminals is 0.18 mm² to 6 mm².

2.3.2 Network connection

You can use the network connection (Fig. 2) on the
devolo Magic adapter to connect it to your inter-
net router using standard network cables.
devolo Magic 2 LAN DINrail
Introduction 12
cross-section for