Devolo MicroLink dLAN Audio User Manual page 37

|
37
devolo MicroLink dLAN software
uration interface to load it into the device. The settings of the device are not
changed by updating the firmware.
To update the firmware, go to the 'Firmware' page. The current firmware ver-
sion is displayed in the upper area of the window. Click the Browse... button
to select the new firmware. Next, click the Upload firmware button to
transfer the selected file to the MicroLink dLAN Audio adapter.
After uploading the firmware, you have to wait another minute before con-
tinuing to make adjustments to the device.
After restarting, the unit can no longer be reached under the same IP address.
In this case, open the HTML configuration interface again via the MicroLink
Informer.
| |
devolo MicroLink dLAN Audio