Removing The Power Electronic On The T1576; Power Electronic - Removal (T1576) - Miele T1515 Technical Information

Technical Information
5.5 Power Electronic – Removal (T1576)
Note
The Power Electronic is fitted to the rear of the Control Electronic.
Should replacement of either electronic be necessary, each
Electronic is replaced individually.
Refer to figure 5-4.
1. Open the front panel (5.2 or 5.3).
2. Disconnect the electrical connections to the Power Electronic
(Item 1).
3. Remove the fixing screw (Item 8).
4. Press the retainer (Item 2) and slide the Power Electronic to
remove it from the holder (Item 5).
Service Tip
Screw (Figure 5-4, Item 8) is shorter and should only be used to
secure the power module.
Figure 5-4: Removing the Power Electronic on the T1576 Dryer.
T1500 Series Clothes Dryers
30