Fault Diagnosis; Service Mode (T1515, T1520, T1526, T1565C & T1570C) - Miele T1515 Technical Information

T1500 Series Clothes Dryers
6

Fault Diagnosis

6.1 Service Mode –
T1515, T1520, T1526, T1565C & T1570C
Access
1. Switch Off the appliance.
2. Release all Push-Buttons.
3. Turn the Program Selector Switch to the Finish/Start (12
o'clock) position.
4. Switch the appliance On.
5. Press and release the Low Temperature Button (or Load Size
Button – depending on the model number) 3 times in quick
succession within 10 seconds.
Acknowledgement Indicator
The Drying LED flashes to show the Service Mode is activate.
Navigation
Refer to Table 6-1. Turn the Program Selector Knob to the desired
position, then press START.
To exit the Service Mode, Switch Off the appliance.
Selector Switch Position
Finish / Start
Cotton Extra Dry
Cottons Normal +
Cottons Normal
Cottons Hand Iron
Cottons Hand Iron
Cotton Appliance Iron
15 minutes Cool Air
20 minutes Warm Air
Permanent Press Hand Iron
Permanent Press Normal +
Table 6-1: Service Mode Functions (T1515, T1520, T1526, T1565C and T1570C)
Function
Buzzer pushButton test
Heater on
Drum drives left (vented models only)
Buzzer Activated
Drum drives right (vented models only)
Condenser Fan
(Condenser models only
Condensate Pump
(Condenser models only)
See Residual Moisture Sensor Test
See Residual Moisture Sensor Test
LED test (LED's illuminated)
Dryer type: Continuous Tone = Vented,
Intermittent Tone = Condenser
41
Technical Information
.