Plumbing Information - Condenser Models; Installation Procedure - Miele T1515 Technical Information

Technical Information
2.2

Plumbing Information - Condenser Models

On Condenser Model Dryers the option exist to have the
condensed water exit the appliance via a Drain Line. A suitable
drain system (i.e. standpipe) is required for this option.
Maximum Drain Hose length: 10 ft
Maximum Drain height: 4 ft.
All Condenser Model Dryers come supplied with the following
accessories to add the Drain Line option. Please do not discard the
parts during an installation as they may be utilized at a later date.
- 6 ft Drain Hose
- Hose Clamp
- Hose Elbow
2.3

Installation Procedure

1. Position Dryer at install location and level using the legs on the
bottom of the appliance. The metal frame of the appliance
provides the ideal location to place a level. Ensure appliance is
as level.
2. Connect Power and perform operational check.
Note
If Dryer is to be installed in combination with a Stacking Kit and
Clothes Washer, the Washer must be positioned and installed first.
If an optional Laundry Stand is being installed - refer to the
Accessories section of the Installation Manual for the procedure on
installing the stand.
Refer to the Miele Installation Manual for further installation
information and procedures.
T1500 Series Clothes Dryers
10