JVC TM-2001U User Manual page 6

Table of Contents
CONNECTIONS
GETTING STARTED
Remote Control Basics
Changing the Batteries
MENU FUNCTIONS
Set Lock Code
Tint
Color
Picture
Bright
Detail
Noise Muting
Set Video Status
Bass
Treble
Balance
MTS (Multi-channel Sound)
TV Speaker
Auto Clock Set
Manual Clock Set
On/Off Timer
Language
Closed Caption
Background
BUTTON FUNCTIONS
APPENDICES
Search Codes
BNC connection box . . . 4
Brige-connection 5
Cable and VCR Connections
There are two basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box to
select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access any or all of the
channels, please refer to Diagram #2.
• For your convenience, connection to a VCR is also shown in the following diagrams. You may
omit the VCR from your connections if you wish.
• Please note: The S-Video Input is available only on the TM-2701SU.
Diagram #1
INPUT
S-VIDEO
OVER
75 75
AUDIO OUT (VHF/UHF) (VHF/UHF)
VIDEO
L
L/ MONO
R R
Illustration of TM-2701SU
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the VCR.
2) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.
• Please consult your VCR's owner's manual for more information on its operation.
• See page 13 for instructions on making stereo connections with your VCR.
Connections
IN
OUT
11