Quick Setup; Getting Started - JVC TM-2001U User Manual

Unpacking Your Television
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television,
please check to make sure you have all of the following items. In addition to this guide, your television
box should include:
1 Television
INPUT 2
VIDEO L MONO AUDIO R
MENU CHANNEL VOLUME POWER
ON TIMER
OPERATE
BNC connection box
IN
OUT
Once you have unpacked your television, the next step is to connect it to your antenna/cable or
satellite system and to connect the audio/video devices you want to use with your television. To
make these connections you will use plugs like the ones illustrated below.
S-Video Plug
RF Connectors
(TM-2701SU only)
Used to connect a
Used to make video
coaxial cable from an
connections with
external antenna or
some VCRs, DVDs,
Cable TV system.
Camcorders, etc.
We recommend that before you start using your new television, you read this entire User's Guide so
you can learn about your new television's many great features. But if you're anxious to start using
your television right away, a quick setup guide follows on the next three pages.
6
1 Remote Two AA
Control
Batteries
TV CATV VCR DVD
POWER
INPUT
VIDEO STATUS 1 2 3
4 5 6
DISPLAY 7 8 9
0
SLEEP TIMER 100+ RETURN+
A matching TV stand for
HYPER SURROUND
RM-C306
the TM-2701SU is also
MUTING V CHIP
+
CH
VOL VOL available (sold separately).
+
C H
MENU EXIT
VCR CHANNEL VCR/DVD
PREV NEXT POWER TV/VCR
REW PLAY FF
Note: Your television
REC STOP PAUSE
OPEN/CLOSE STILL/PAUSE
and/or remote control may
differ from the examples
TV
illustrated here.
A/V Input Plug
Used to connect
audio/video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.

Quick Setup 1

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you need
to begin using your new television right away. This information includes basic instructions on
operating your remote control, making a simple cable/antenna and optional VCR connection and,
finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult the
other detailed sections of this guide.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
Raise the latch on the remote's back cover, or push down on the back cover and slide the cover
towards the bottom of the remote control to remove. Insert two batteries carefully noting the "+" and
"–" markings, placing the "–" end in the unit first. Slide or snap the cover back into place.
Basic Operation
Turn the television on and off by pressing the P
OWER
POWER
Remote Power
Button
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available channels.
The right and left buttons will turn the volume up or down. These buttons are also marked with four
arrows and are also used with JVC's onscreen menu system. You will need to use these buttons
later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
Proceed to Step Two
button at the top right corner of the remote.
MUTING V CHIP
+
CH
VOL VOL
+
C H
MENU EXIT
Remote Key Feature Buttons
7