Sound Settings - JVC TM-2001U User Manual

Sound Settings

Bass
You can increase or decrease the level of low-frequency sound in the TV's audio with the Bass adjustment.
Press the M button
ENU
œ ❷
To BASS
❿
To increase the bass
➛
To decrease the bass
œ ❷
To move to the next setting
Treble
Use Treble to adjust the level of high-frequency sound in your TV's audio.
Press the M button
ENU
œ ❷
To TREBLE
❿
To increase the treble
➛
To decrease the treble
œ ❷
To move to the next setting
Balance
Adjust the level of sound between the TV's two speakers with the Balance setting.
Press the M button
ENU
œ ❷
To BALANCE
❿
To shift the balance towards the right speaker
➛
To shift the balance towards the left
speaker
œ ❷
To move to the next setting
NOTE:
You can leave the Sound Settings menu at any time by pressing the E
32
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may
also include a Second Audio Program (SAP)
œ ❷
➛❿
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio
through your stereo.
œ ❷
➛❿
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume level is low!
If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to "ON".
NOTE:
• External Speakers: When using external speakers or amplifiers, shut off the TV Speakers
button on the remote control.
(see 'TV Speakers') above.
XIT
Sound Settings
.
Press the M button
ENU
To MTS
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
Press the M button
ENU
To TV SPEAKER
TV SPEAKER ON OFF
To turn the TV's speakers ON or OFF
E when finished
XIT
33