Troubleshooting - JVC TM-2001U User Manual

Troubleshooting

PROBLEMS
The picture is • Make sure the BNC connector box is properly connrcted to the TV.
excessively bright • The television Video input jack(RCA) is not terminated.
42
CHECK
Search Codes
Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV P and R + buttons. Hold for at least three seconds and release.
OWER ETURN
3) Press TV P , see if the CATV or Satellite box responds.
OWER
4) If there was a response, press R +. The operating codes are now set. If there was no
ETURN
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the
remote control which came with the equipment.
5) Press R + to exit.
ETURN
VCR Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR".
2) Press the VCR P and R + buttons. Hold for at least three seconds and release.
OWER ETURN
3) Press VCR P , see if the VCR responds.
OWER
4) If there was a response, press R +. The operating codes are now set. If there was no
ETURN
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the
manufacturers remote control which came with the VCR.
5) Press R + to exit.
ETURN
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
2) Press the DVD P and R + buttons. Hold for at least three seconds and release.
OWER ETURN
3) Press DVD P , see if the DVD player responds.
OWER
4) If there was a response, press R +. The operating codes are now set. If there was no
ETURN
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use the
manufacturers remote control which came with the DVD player.
5) Press R + to exit.
ETURN
43