Table of Contents
Advertisement
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information
includes basic instructions
on operating your remote control, making a simple cable/antenna
and optional VCR connection
and, finally, information
on programming your television's
Auto Tuner.
If you have questions, or for more detailed information
on any of these steps, please consult
other sections of this manual.
Step One -The Remote Control
The remote control is the key to operating your television's
many great features. Before you can
operate your remote control, you first need to install the batteries (included).
For RM-C255, RM-C253 and RM-C252, lift and pull the latch on the back of the remote to
open. For RM-C205, raise the latch on the remote's back cover to remove. Insert two batteries
(included) carefully noting the "+" and "-' markings, placing the "-" end in the unit first. Snap the
cover back into place.
RM-255, RM-0253
and RM-252
RM-C205 ONLY
Basic Operation
Turn the television on and off by pressing the POWERbutton at the top right corner of
the remote.
The four key feature buttons at the center of the remote can be
used for basic operation of the television. The top and bottom
buttons will scan forward an back through the available chan-
nels. The right and left buttons will turn the volume up or down.
These buttons are also marked with four arrows and are also
used with JVC's onscreen menu system. You will need to use
these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or
cable.
Note: Illustration
of remote control RM-0252
Proceed to Step Two
_
11
Advertisement
Table of Contents
