Changing The Information Displayed - PURE TEMPUS-1 Owner's Manual

Changing the information displayed

Press the Info button and repeat to cycle through the eight display modes. These modes affect what you see on the
screen when you have not pressed a button for around ten seconds.
Scrolling text The default mode, displays scrolling text messages which accompany the audio, when broadcast.
Clock Displays a full screen clock with time obtained from the current multiplex. If your TEMPUS-1 has been
unplugged from the mains there may be a slight delay before the time appears when you switch it on.
Day and date Displays the day and date obtained from the current multiplex.
Program Type A description of the type of content being broadcast by the station.
Multiplex name Displays the name of the multiplex in which the current station is found. Multiplexes or ensembles are
groups of stations owned and broadcast by a multiplex operator.
Channel Displays the DAB channel and frequency for the station you are listening to.
Mode Displays whether the current station is stereo or mono and the data rate at which the audio is being
transmitted. This rate is set by the broadcaster to suit the type of material being transmitted.
Signal quality Displays the signal quality for the station you are tuned to. As a guide, values from 85 to 100
indicate good reception, 70 to 84 borderline reception and 0 to 69 poor reception.
9