Changing The Information Shown On Screen; Using Textscan™ To Pause And Control Scrolling Text - PURE Evoke-1S Owner's Manual

Changing the information shown on screen

You can change the information that is displayed on screen. Press the Info button and repeat to
cycle through the information display options available for the current audio source.
Scrolling text
Full screen time
Time and date
Programme type
Multiplex name
Multiplex info
Bit rate
Signal quality
Signal strength
Stereo mode
ChargePAK status
Using textSCAN™ to pause and control scrolling text
1. When 'Scrolling text' information is displayed in either DAB or FM, push the Tune dial to
pause the scrolling text.
BBC Radio 6Music
Now playing: Race For T
2. Turn the Tune dial right and left to scroll forwards and backwards through the current scrolling
text. To exit textSCAN push the Tune dial again.
Tune
Information broadcast by most DAB stations and some FM (RDS) stations.
Displays the time (and an alarm indicator if the alarm is set).
Displays the time and date updated regularly by the DAB or FM (RDS) signal.
Describes the content of the current DAB or FM (RDS) station, e.g., Pop Music.
The DAB multiplex in which the current station is broadcast, e.g., Digital1.
The channel of the current DAB Multiplex, e.g., 12B.
The bit rate (audio compression level) of the current DAB station and a
stereo/mono indicator.
Displays DAB signal quality: 85 to 100 good; 70 to 84 OK; 0 to 69 poor.
Displays a meter illustrating the strength of the DAB or FM signal.
Indicates whether the current FM broadcast is in stereo.
Displays a charging or percentage power remaining indicator for the
optional ChargePAK Model E1 rechargeable battery pack (see page 12).
Charging indicator
(when receiving mains power).
BBC Radio 6Music
50% charging
BBC Radio 6Music
Prize by Flaming Lips
% Charge remaining
(when powered by a ChargePAK)
BBC Radio 6Music
OR
Tune
BBC Radio 6Music
Playing: Race For Th
50%
Tune
> Exit
Using your EVOKE-1S
5