Changing Stations - PURE TEMPUS-1 Owner's Manual

Changing stations

You change stations using the Tune knob. If you have assigned stations to presets you can also select them by pushing
the relevant numbered button (1-5) or
1. The current station is shown at the top of the screen. Turn the Tune knob until you see the station you want to listen
to on the bottom of the screen.
2. Push and release the Tune knob to change the station.
Changing the station order
To change the order in which stations are listed, push the Menu button, turn the Tune knob and push to select the Station
order option.
The current order is shown at the top of the screen. Turn the Tune knob to scroll through the following options at the
bottom of the screen and push to select one:
Alphanumeric
Fav station
Active station
Multiplex
Trim stn. list
→ presets Available only when Fav station order (above) has been selected. Transfers your favourite stations to the
8
- .
Displays all stations in alphanumeric order. This is the default setting.
Displays your ten most listened to stations first in alphanumeric order and the others after in
alphanumeric order. Your favourite stations then display a
Displays active stations at the top of the service list and inactive ones at the bottom in alphanumeric
order. Inactive stations are those on your station list but not currently available, marked with a '?'.
Lists stations in groups according to their multiplex. Multiplexes or ensembles are groups of stations
owned and broadcast by a multiplex operator.
Removes inactive stations from the station list.
preset buttons. See page 10 for information on using presets.
next to the name on the station list.