KVH Industries TV3 Installation Manual page 27

17 Continued
Setup Wizard
System configuration continues by prompting
you to enter information or perform specific
tasks as needed. For example:
• Enter installer and vessel information
• Select a GPS source or enter vessel location
• Select a source for heading data (if NMEA
device is connected)
• Select the satellite TV service
• Select satellite(s) to track (single, or preset
groups listed in Figure 42), or create user-
defined satellites
• Select a configuration
• Set up automatic switching, if applicable
• Activate the receivers
Additional Setup Information
Once the Setup Wizard has been completed,
perform follow-up tasks such as:
• Setting the skew angle (linear only)
• Setting up receivers to operate with the
system (as instructed by the Wizard)
• Activating the receivers (as instructed by the
Wizard)
26
Set Up the System
Figure 42: Preset Satellite Groups
Service
DIRECTV
U.S.
DISH
Network
Bell TV
Linear
Note: List is subject to change.
Satellites (A-B-C-D)
DIRECTV Dual: 101W and 119W
Western Arc: 110W, 119W, 129W
Eastern Arc: 61W, 72W, 77W
Legacy East Arc: 61W, 110W, 119W
DISH 500: 110W, 119W
Bell TV Dual: 82W and 91W
If multiple satellites are needed, filter the list by
region and create a custom group of satellites
known to work for the system configuration.