KVH Industries TV3 Installation Manual page 26

17 Continued
Update Software and Satellite Library
Before you start the Setup Wizard, update the
system software and satellite library with the
latest versions from the portal (see last item on
page 3).
a. Select Exit in the Setup Wizard page. The web
interface appears.
b. At the Updates page, select the antenna. Then
select Install Update (see Figure 41). Find the
<software version>.kvh file in your downloads
folder, then double-click to install.
c. Wait for the update to complete. It may take
up to 45 minutes. The TV-Hub's lights will
alternate orange while the update is in
progress. Once complete, the web interface
will report that the latest version is installed.
d. When the software update is complete, select
the Satellite Library in the left pane, and
select Install Update. Find the .xml file you
had downloaded, and double-click to install.
e. Select Settings then select Setup Wizard.
NOTE: Whenever you close the web interface
before completing the Setup Wizard, the Setup
Wizard will automatically reappear when you
re-enter http://tvhub.kvh.
f. Select Proceed with Setup Wizard on the
Setup Wizard home page.
Set Up the System
Figure 41: Software Updates Page
25