System-Related Command Summary - Fluke 8845A Programmer's Manual

[1]
Command
FETCh[1|2]?
READ?
DISPlay {OFF|ON}
:TEXT <quoted string>
:CLEar
:TEXT?
DISPlay?
SYSTem
:BEEPer
:STATe {OFF|ON}
:STATe?
:DATE <mm/dd/yyy>
:DATE?
:ERRor?
:ERRor:BEEPer {OFF|ON}
:ERRor:BEEPer?
:TIME <hh:mm:ss>
:TIME?
:VERSion?
DATA
:POINts?
*RST
*IDN [ON|OFF], [Quoted String]
*IDN?
L1
L2
[1] Default parameters are shown in bold
Table 16. System-Related Command Summary
Transfer stored readings to output buffer
Set trigger system to 'wait-for-trigger'
Turn display off or on
Write message to display
Clear message from display
Retreive displayed message
Retrieve display setting
Path to system controls
Issue a single beep
Disable/enable beeper for limit,
and diode testing
Retrieve state of beeper
Sets the Meter's date
Retrieves the Meter's date
Retrieve meter's error queue
Enable/disable beeper for errors
Retrieve beeper state for errors
Sets the Meter's time
Retrieves the Meter's time
Retrieve meter's SCPI version
Path to meter's memory
Retrieve the number of stored readings
Reset Meter to its power-on state
Enables or disables a secondary indentification defined by the
quoted string. When disabled, *IDN? will return the indentification
set by the Meter's manufacturer.
Retrieve meter's identification string
Set the command set to 8845
Set the command set to Fluke 45
Supported SCPI Commands
Description
Digital Multimeter
35