Fluke 8845A Programmer's Manual page 88

8845A/8846A
Programmers Manual
Error Code
200
201
202
203
222
223
224
225
226
300
301
302
303
310
311
320
321
322
325
330
340
350
360
370
421
422
426
510
511
80
Table 30. Execution Error Codes and Descriptions (cont.)
Error Text
IG Invalid
IG Packet size
Trigger ignored
Configuration
acknowledgement
Parameter invalid
FUNC2
Math mismatch
Range mismatch
Load fail
GX Sync send
GX Sync recv
GX Sync error
GX Port fail
GX Ack queue full
GX Pack sequence
GX Ack
GX Pack over
GX Ack num
GX Ack byte
GX CRC failed
GX Info packet
GX Control byte
GX Quality low
GX Restart
Instrument configuration
inv
Instrument configuration
parameter
Instrument configuration
load
CCO Name bad
RS-232
framing/parity/overrun
error
Description
Invalid response type from inguard.
Incorrect packet size from inguard.
Trigger ignored.
Wrong number configuration acknowledgement.
Invalid parameter.
Function/2nd func mismatch
Function/math mismatch
Function/range mismatch.
Measurement configuration load failed.
Inguard not responding (send).
Inguard not responding (recv),
Lost sync with inguard.
Could not open guard crossing port.
Acknowledgement queue full.
Acknowledgement queue full.
Guard crossing not acking packets.
Guard crossing oversize packet recieved.
Guard crossing wrong ack number.
Guard crossing unknown ack byte.
Guard crossing Bad CRC.
Guard crossing info packet recieved; link not active.
Guard crossing unknown control byte.
Guard crossing quality indicator too low.
Guard crossing restarted.
Tried to set invalid state.
Invalid parameter.
Instrument configuration load failed.
CCO constant name is bad.