Volvo Penta IPS Operator's Manual page 21

SETTINGS
LANGUAGE
BLEEP
ENGINE
DISPLAY
P0002408
UNITS
SPEED
DISTANCE
OIL PRESSURE
TURBO PRESSURE
FUEL RATE
P0002409
7748921 04-2008
ENGLISH
OFF
PORT
BACK
KM/H
KM
kPa
kPa
L/H
BACK
Configuration menu
Press button 5 for five seconds to enter the Configu-
ration menu. Navigate with the up and down arrows,
select with the right arrow.
NOTICE! The port engine, or both engines must have
the ignition on when display settings are made.
System information
System information shows the EVC-menyn and is han-
dled by the knob on the control panel. For more infor-
mation, see chapter Instruments and Con-
trols page 20.
Settings
- Language: Setting of what language the informa-
tion is to be presented in are made in the EVC-
menu, see Instruments and Controls page 20.
- Bleep: On/Off, setting if pressing the instrument
buttons will be followed by a beep or not.
- Engine: Setting of what kind of installation the dis-
play is a part of and which engine is to be shown
inthe display.
- Display: Setting of intervals (unit settings are made
in the EVC-menu, see Instruments and Con-
trols page 20):
Rpm interval, 2500–9000 rpm, in steps of 500 rpm
Speed, on/off
Speed interval, 10–100 knots, in steps of 10 knots
Graph interval, 2 min, 10 min, 30 min, 60 min, 2 h,4
h or 8 h
Instruments and Controls
19