Volvo Penta IPS Operator's Manual page 15

Marine engine
Hide thumbs Also See for IPS:
Table of Contents

Advertisement

1
P0005255
7748921 04-2008
Gauges
Tachometer
The tachometer displays engine speed; multiply the
value shown on the dial by 1,000 to get the number of
engine revolutions per minute.
Boat and engine information is displayed in the tach-
ometer window. Information displayed depends on
engine type, the number of sensors and which acces-
sories are installed.
Optional instruments
These instruments are sold as engine options by Volvo
Penta.
1 Fuel level gauge
The fuel level gauge shows the quantity of remain-
ing fuel.
2 Voltmeter, battery charging
The meter shows the alternator charge current.
During operations the charge voltage should be
around 14 V. When the engine is stopped and elec-
trical power switched on the battery voltage should
be around 12 V.
If a 24 V system is installed, the charge voltage
should be around 28 V during operations.
3 Coolant temperature gauge
The instrument shows engine coolant temperature.
During operations coolant temperature should nor-
mally be between 75-90°C (167-194°F).
4 Oil pressure gauge
The oil pressure gauge displays engine oil pres-
sure. During operations the oil pressure gauge
should normally show 4-5.5 bar. At idle, lower val-
ues are normal.
5 Rudder position indicator
The instrument shows rudder position.
6 Fresh water level sensor
Freshwater tank level gauge.
7 Alarm monitor
The alarm monitor gives a visual warning to call
attention to any alarms that occur.
Instruments and Controls
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents