Clean Feed Dog; Oil The Machine - Zanussi ZAN2250 User Manual

Anl.790.GB/SE/DK/FI/CZ/HU
CLEANING THE FEED DOG
CLEANING THE FEED DOG
Instruction: to obtain first rate effect of needlework. Frequent cleaning is required for frequent use.
ÖLEN DER MASCHINE
ÖLEN DER MASCHINE
OIL THE WORKS
OIL THE WORKS
Instruction: Apply only
one or two drops of machine oil, or cloth will be stained. If the machine should not run well after being out of use for a long
period, apply a few drops of oil before running it and the result will be the same as the well thumbed condition
OILING THE BACK OF T OILING THE BACK OF T
Remove the cover, screw and top cover Oiling the parts as shown in the illustration.
(1) Cover (2) Screw (3) Top cover
OIL THE PENDULAR SHUTTLE
OIL THE PENDULAR SHUTTLE
Oiling is required for the positions marked in the illustration (4) Cover
13.09.2006 13:33 Uhr
OP OP
Seite 18
16
Switch off lamp and pull plug
out before cleaning the feed
dog. Remove the needle and
presser foot. Remove the screw
on the left hand side of the nee-
dle plate with the screwdriver.
Remove the needle plate.
Clean the feed dog teeth with a
brush and refit the needle plate.
Fit the presser foot and it is
ready for sewing