Pattern Selection Dial; Select Double Action Stitch; Stitch Length Selection Dial; Stitch Width Selection Dial - Zanussi ZAN2250 User Manual

Anl.790.GB/SE/DK/FI/CZ/HU
P A TTERN SELECTION DIAL
P A TTERN SELECTION DIAL
SELECTION DIAL
SELECTION DIAL
REVERSE BUTT REVERSE BUTT
13.09.2006 13:33 Uhr
FOR LENGTH OF STITCH
FOR LENGTH OF STITCH
ON ON
Seite 10
Needle is pulled out from fabric and the desired size of stitching should he selected
on the selection dial.
Select Double Action stitching
As for stitching Double Action stitching, its length
Wıth the following adjustment, the length of stitchcould be selected as you like.
" + " refers to thick stitch in Iength.
" - " refers to sparse stitch in length.
Instruction: Width of stitch changes between
selection dial 2 and 3 should be different.
-Turn the selection dial with help adjust stitch to its ideal length.
- The bigger the number is,the longer the stitch is.
� ...... " is the correct range of adjustment for making buton holes
-Range from 0.5 to 4 could be used for zigzag stitching
-The correct elastic stitch value should be (1)-(10).
How to make the elastic stitch better?
In case the elastic stitch turns out to be unsatisfactory, you may turn the selec-
tion dial to " - " and in this way, stitches would be thicker while turning to "+" they
would be more sparse.
Instruction: while turning the selection dial. The needle should be stopped at a
rather high position above fabric.
If the reverse button is always pressed
down, the machine will do reverse stit-
ching all the time.

Lower feed dog

1. Open the cover (1) Cover 2. Lower the feed dog by pulling down the shaft and
moving it towards the direction inclicated by the arrow head as shown in the
illustration. (2) Lower teeth lever 3. Raise the feed dog by pulling down the lower
teeth lever and moving it towards the direction indicated and reach "A" by the
arrowhead as shown in the illustration.
Instruction: for ordinary
sewing, all the feed dog shall be raised.
8
should be adjusted into (1)-(8).