Reconyx Hyperfire Manual page 5

Cellular Programing Options
Use Cellular: Be sure this is "Checked" if you want to send photos.
NOTE: This option can also be turned ON/OFF on the camera.
Send daily status picture: This will automatically program the camera to send a
daily status picture between 12:00pm and 12:30pm. We recommend you leave this
box checked. Then you will get at least one picture a day even if nothing triggers the
camera.
The current battery percentage, memory card status and number of pictures taken,
will also be sent.
The status picture will verify that the camera is running, positioned as you left it, and
allow you to check the battery level and memory card space available.
The status picture that is sent will be marked with an "S" (status) to the right of the
Date/Time Stamp.
Motion photos are marked with an "M"; Timelapse photos are marked with a "T".
Select your carrier...: Select "Verizon" from the dropdown list.
This will allow you to input up to two email addresses where the photos will be
delivered.
www.reconyx.com 4