Cellular Overview - Reconyx Hyperfire Manual

Cellular Overview

The RECONYX
®
to send photos over a data connection on the Verizon wireless network to two email
accounts of your choice.
The images are transmitted in near real-time after a sequence of images are
captured.
Other things you will need before using your camera:
 Secure Digital® (SD or SDHC) Memory Card
 12 AA Batteries
NOTE: The SC950C and SM750C cameras must be run on either Energizer® 1.5V AA
Ultimate Lithium batteries or NiMH rechargeable batteries.
There is also an External Power Jack available. This can be used with the Solar
Panel Power Unit (available at www.reconyx.com) or other
 Windows® PC to install and run MapView™ and the "Security Settings" software
to program your cellular camera.
 Activate your camera as a "Connected Device" with Verizon at:
www.verizonwireless.com/activatedevice
NOTE: If you have any questions or concerns relating to the operation or
functionality of your camera, please contact our Technical Service
Department by email at
866-493-6064.
www.reconyx.com
HyperFire Security Series Cellular Camera will allow your camera
TM
support@reconyx.com or by calling toll free
2