Programming Your Cellular Camera - Reconyx Hyperfire Manual

Programming Your Cellular Camera

Software
In order to program your cellular camera, you will need to install the software that
came with your cellular camera. With both the SC950 & SM750: You will need to
install MapView Security and run the "Security Settings" program that is included
with your camera.
TIP: You can download the latest software
version at:
www.reconyx.com/software/securityview
Running the Security Settings Software
To program the camera, you will need to insert an SD card
in the computer and then click on the "Security Settings"
program icon on the desktop.
Select the SD card you would like to save the settings to
and click "OK" to start the program.
Click on the "Cellular" tab to program your camera's cellular modem:
3 ©RECONYX, Inc.