Subscribe to Our Youtube Channel
Related Manuals for Worx WU675
Summary of Contents for Worx WU675
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS HigH Frequency Multi-Function tool Wu675...
-
Page 2: General Power Tool Safety
General power tool safety entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling warnings or unplugging the power tool. keep cord away from heat, oil, sharp edges or moving parts. - Page 3 e) Do not overreach. keep proper footing and balance at all f) keep cutting tools sharp and clean. Properly maintained cutting times. This enables better control of the power tool in unexpected tools with sharp cutting edges are less likely to bind and are easier to situations.
- Page 4 Additional safety points for your Do not incinerate or burn the battery pack, it may explode. Do not charge a damaged battery pack. tool Replace any damaged supply cords on your charger. Always disconnect the charger power supply before making or breaking the connections to the battery pack.
- Page 5 Symbols • Work in a well-ventilated area. • Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles. To reduce the risk of injury, user must read instruction manual warning: while working with this power tool, hand/arm vibrations occur.
-
Page 6: Component List
Component list LED light On/Off switch Battery pack latch Battery pack Variable speed control Venting slots Sanding pad (Unperforated) * Fastening piece Universal cutting blade Standard cutting blade HSS Semicircle Saw Blade Sanding sheet (Unperforated)* Sanding pad (perforated) * Sanding sheet (perforated)* Sanding finger pad* Sanding finger sheet* Triangular carbide rasp*... -
Page 7: Technical Data
Description woRX High frequency Multi-function tool How the tool is used and the materials being cut or drilled. Type wU675 (6-designation of machinery, representative of The tool being in good condition and well maintained oscillation tool) The use the correct accessory for the tool and ensuring it is sharp and in good condition. - Page 8 Accessories • 1.3Ah Lithium battery pack (WA3509) • 30min charger (WA3845) • Allen key We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake.
-
Page 9: Operating Instructions
Operating instructions Note: Before using the tool, read the instruction book carefully. iNteNDeD USe The power tool is intended for sawing and separating wooden materials, plastic, plaster, non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft wall tiles and for dry grinding of small surfaces. -
Page 10: Operation
Operation warning: Do not touch the gear box after long working time, because it could be hot. MoUNtiNG tHe tool (See fig. B1, B2) caution: For all work or when changing application tools, always wear protective gloves. Avoid danger of injury from the sharp edges of the application tools. - Page 11 3) Fit the adapter onto the tool holder, then place the application tool onto the adapter. Make sure that the tool holder, the adaptor, and the application tool share a flush fit. 4) Reposition the fastening piece onto the application tool and tighten with the Allen key.
- Page 12 Low oscillation frequency: Polishing varnishes. MoUNtiNG tHe SUctioN Device (See fig. D1, D2) When vacuuming, mount the suction device as shown in D1-D2. Note: Using the sanding pad perforated. You can only do the vacuuming after fitting the dust collector. SaNDiNG Typical application: wood, metal;...
-
Page 13: Working Hints For Your Tool
regarding available recycling and/or disposal options. Discharge ScRaPiNG Typical application: Scraping off old varnish or adhesives, removing your battery pack by operating your tool, then remove the battery glued carpeting, e. g. on stairs or other small to medium-sized pack from the tool housing and cover the battery pack connections surfaces. -
Page 14: Maintenance
Maintenance Plug replacement (UK & Ireland only) Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use If you need to replace the fitted plug then follow the instructions water or chemical cleaners to clean your power tool. -
Page 15: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description woRX High frequency Multi-function tool Type wU675 (6-designation of machinery, representative of oscillation tool) Function Sawing,scraping,sanding Complies with the following Directives, •...
Need help?
Do you have a question about the WU675 and is the answer not in the manual?
Questions and answers