Related Manuals for Worx SONICRAFTER WU681
Summary of Contents for Worx SONICRAFTER WU681
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS HIGH FREQUENCY MULTI-FUNCTION TOOL WU681...
-
Page 6: Component List
COMPONENT LIST Hyperlock™ Accessory Clamping Lever On/Off Switch Variable Speed Dial Constant Speed Electronics Venting Slots Universal-Fit Accessory Interface* Smaller Flange (For other brands’ sanding pads) Flange Led Light *Works with other oscillating tool brands’ accessories. The following compatible brands are trademarks owned by third parties which may be registered by their respective owners: Black &... - Page 7 The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions.
-
Page 8: General Power Tool Safety Warnings
GENERAL POWER TOOL device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. SAFETY WARNINGS 3. PERSONAL SAFETY Warning: Read all safety warnings and all a) Stay alert, watch what you are doing and instructions. Failure to follow the warnings and use common sense when operating a instructions may result in electric shock, fire and/ power tool. - Page 9 SYMBOLS and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power WARNING–To reduce the risk of tools. Such preventive safety measures injury, user must read instruction reduce the risk of starting the power tool manual accidentally.
-
Page 10: Intended Use
OPERATING INSTRUCTIONS Note: Before using the tool, read the instruction book carefully. INTENDED USE: The power tool is intended for sawing and remodelling wooden materials, plastic, plaster, non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft wall tiles and for dry grinding of small surfaces. - Page 11 APPLICATION Warning: The sawing teeth are very sharp. Do not touch during mounting and application. The workpiece must be clamped tightly before it is cut. Description Application Wood, plastic, fiberglass, Bi-Metal nails, non-ferrous metals, Metal/Wood End Cut thin sheet metal, hardened Blade fillers.
-
Page 12: Working Hints For Your Tool
ENVIRONMENTAL Cut/Sand with a constant movement and light pressure. PROTECTION Heavy pressure does not increase the cut/ removal rate – the accessory merely wears faster. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with WORKING HINTS FOR YOUR your Local Authority or retailer for recycling TOOL... -
Page 13: Plug Replacement
The wires in the mains lead are colored in accordance with the following code: Declare that the product, BLUE =NEUTRAL Description WORX High Frequency Brown = Live Multi-Function Tool As the colors of the wires in the mains lead Type WU681 (6-designation of machinery,... - Page 16 Copyright © 2014, Positec. All Rights Reserved. 2PGA90APK11004A0...
Need help?
Do you have a question about the SONICRAFTER WU681 and is the answer not in the manual?
Questions and answers