Assemble Two Halves Of Boom; Auxiliary Handle - Yardworks Grass trimmer/edger Owner's Manual

ASSEMBLY INSTRUCTIONS
Assemble the two halves of the boom(Fig E1)
1.Insert the lower shaft(3) into upper shaft(2).
2.Then turn the upper shaft(2) until lock button clicks into place.
3.Turn the lower shaft(3) collar until locked into place.
Fig. E1
Auxiliary handle (Fig. E2)
WARNING
To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when operating the
grass trimmer. Keep proper balance at all times for better control of the tool in unexpected situations.
1. Turn the handle lock knob (1) counter-clockwise several turns to loosen the auxiliary handle (2).
2. Adjust the handle position to provide the best level of balance and control for the operator.
3. Securely lock the handle in position by turning the knob clockwise.
4. Before operating the grass trimmer, make sure the auxiliary handle is tightly locked into position.
Fig. E2
12
2
1