JRC NCR-333 Instruction Manual page 81

b. The diagnosis of LCD panel (LCD DIAGNOSIS)
Procudure
1) Select 2.LCD DIAGNOSIS, and press the ENT key. Cursor moves to the right side of ":".
2) Press the ▲ ▼ key and select the following items;
START: Diagnosis is started.
CANCEL: Diagnosis is canceled, and cursor returns to
3) Select the "START", and press the ENT key.
This diagnosis blinks the viewing area every 2 seconds. (White -> Black -> White-> ...)
c. Self diagnosis log (SELF DIAGNOSIS LOG)
Procudure
1) Select 3.SELF DIAGNOSIS
The newest result is displayed on this screen.
2) To display the next old result, press the ▼ key. (Up to last 10 results)
The diagnosed time is displayed when external GPS receiver is connected.
"--/--/-- --:--" is displayed when time is not able to be acquired. (External GPS receiver is not connected.)
SELF DIAGNOSIS LOG
9.RESULT 29/06/05 12:34
ROM[1][2]
RAM
SIO[1][2][3]
PS
ANTENNA CHECK
518KHZ
490KHZ
4209.5KHZ OVER ALL TEST:GOOD
SELF DIAGNOSIS LOG
9.RESULT 29/06/05 12:34
ROM[1][2]
RAM
SIO[1][2][3]
PS
*DIAGNOSIS LOG*
ANTENNA CHECK
518KHZ
[PRINT OUT]
490KHZ
[CANCEL]
4209.5KHZ OVER ALL TEST:GOOD
LOG, and press the ENT key. SELF DIAGNOSIS LOG screen appears.
:NG
:GOOD
:NG
:GOOD
:GOOD
OVER ALL TEST:GOOD
OVER ALL TEST:GOOD
:NG
:GOOD
:NG
:GOOD
:GOOD
OVER ALL TEST:GOOD
OVER ALL TEST:GOOD
2.LCD
ⅩⅠ
To print a result to the external printer, press the * key
in order to display the sub screen.
Select the "[PRINT OUT]", and press the ENT key.
Printing is started.
To stop printing, press the CLR key while printing.
To return to the SELF DIAGNOSIS screen, select the
"[CANCEL]" and press the ENT key.
ⅩⅠ
DIAGNOSIS.
6-49